PhoenixTM 10Ch Oil Quench RF Profiling System (Up to 1000°C)
SKU : HTS-12-300-10-TX
Application : integrated oil quench heat treatment processes
PTM1-210-K l 10 Channel Data Logger, temperature measuring range -100°C to +1370°C, type K, standard temperature operation.
Accuracy +/- 0.3°C, resolution 0.1°C.
Total memory 3.8M data points of non-volatile memory over 10 channels.
Sampling interval 0.2s to 60 minutes on all selected channels.
Maximum ambient operating temperature 80°C.
Original calibration certificate and correction factors stored in memory for access as required.
Up to 1000 hours battery life from 2 x ‘AA’ Alkaline Standard Batteries.
USB communication cable included.
Optional upgrade to two way real time telemetry (PTM telemetry system required).
Dimensions: 200mm(L) x 98mm(W) x 20mm(H).
TS12-300-1 l Series TS12 - 300mm High Thermal Barrier - For oil quench and salt baths. 10 Ch. Version
High grade stainless steel construction with rigid insulation frame.
TS08-145-1 inner thermal barrier with high grade stainless steel construction and phase change heat sink.
Data logger tray and inner cavity designed with 'thermal break' construction to minimise heat transfer and stainless steel compression fittings for thermocouples.
Supplied with 3 sets of high temperature disposable insulation blocks and 5 high temperature gaskets.
Measurement potential = 10 channels.
Accepts PTM1 Data Logger.
8.0 hours at 600°C,
5.7 hours at 800°C,
5.0 hours at 900°C,
4.6 hours at 950°C
Thermal performance assumes a further 1 hour quench and wash cycle.
Dimensions: Height 300mm x Width 398mm x Length 600mm.
Weight: 67 Kg
All Phoenix TM thermocouples are manufactured to the highest quality standards and conform to the ANSI MC96.1 special limits specification with accuracy +/-1.1°C or +/-0.4%. The insulation material and the plug terminations are color coded to conform to the IEC 60584 standard.
For temperatures up to 1000 °C and diameters of 1 mm or 0.5 mm the thermocouple sheath is a high temperature nickel-chromium-iron alloy (HT Alloy - Inconel®) providing resistance to corrosion and heat along with high strength and good workability. These thermocouples have an insulated hot junction (HJ) to ensure maximum protection against electrical interference from heating elements within the furnace. The thermocouple can be supplied in different MI diameters (0.5 to 3.0 mm – standard 1.6 mm) to suit the application needs, handling requirements and response characteristics.
For temperatures above 1000 °C the thermocouple sheath recommended is an Ultra-High Temperature alloy (UHT Alloy). The alloy is a nickel-chromium with 1.4% silicon which provides inert high oxidation resistance and strength at temperatures up to 1250 °C. Thermocouples with 1.6 mm and 2.0 mm diameter wire are available with the option to include AMS2750E and CQI-9 compliant calibration certificate.
Thermocouple design options allow either standard termination in the thermocouple plug or with a PTFE tail which is helpful when managing installation of high numbers of thermocouples in thermal barriers such as the TS06 & TS07 (Aluminium Solution and Steel Reheat Applications).
TC28-100-K l Mineral Insulated Thermocouple, Nicrobel Inconel Type K 1.0mm, Max Temperature 1000°C - 1.0m long
TC28-200-K l Mineral Insulated Thermocouple, Nicrobel Inconel Type K 1.0mm, Max Temperature 1000°C - 2.0m long
TC28-300-K l Mineral Insulated Thermocouple, Nicrobel Inconel Type K 1.0mm, Max Temperature 1000°C - 3.0m long
TC22-100-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 1.0m long
TC22-200-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 2.0m long
TC22-300-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 1.6mm, Max Temperature 1200°C - 3.0m long
TC32-100-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 3.0mm, Max Temperature 1350°C - 1.0m long
TC32-200-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 3.0mm, Max Temperature 1350°C - 2.0m long
TC32-300-K l Mineral Insulated Thermocouple, Ultra-High Temperaturealloy (UHT Alloy) Type K 3.0mm, Max Temperature 1350°C - 3.0m long
SW25 l Thermal view survey software
PhoenixTM 'Thermal View Survey' is a powerful software package for recording and analysing TUS data from your furnace and oven surveys. The key fundamentals of this software package are:
- Simplicity: Screen layout is clear, concise, and intuitive making the software user friendly, uncluttered, and easy to use without compromise to the analysis detail available.
- Accuracy: the software has been designed so users can set up and control the survey in real time, then analyse the resulting data and produce within minutes, the hard copy report with full compliance to industry requirements including AMS2750E, etc.
When the Data Logger is downloaded the information is saved in a database which can be organised in a logical manner for easy access to the historical data. Templates can be constructed for frequently used TUS temperature test levels and TUS frame diagrams or photographs. Thermocouple and data logger correction factors can be entered into the software to give fully corrected data in real time operation, or for historic analysis and report print out.
‘PhoenixTM Survey’ software is bundled together with ‘Thermal View Plus’, a package with extra analysis features including real time operation for other heat treatment users.
‘PhoenixTM Survey’ software has all the essential functions you require to help you monitor, and analyse your TUS surveys, produce compliant reports, save production time and free up your technical staff.
Thermocouple and Instrument
• Correction Factors
• Full temperature data at TUS levels
• TUS temperature level library
• TUS frame library & on-screen view
• Temperature overshoot warnings
• Password protection
• Furnace class result at each level
• Rounding Up/Down to ASTM E29
• On screen notes
• Printed report to ASM2750E etc
• Export to CSV file
• RF & USB real time analysis
• On screen help
• Database storage
• Audit trail
• TUS with up to 60 thermocouples
Increasing the power of the Survey software new functionality has been added to allow TUS surveys to be completed with up to 60 thermocouples. By merging TUS files from three 20 channel data loggers a single TUS survey report can be created with full access to Thermocouple and instrument correction factors and TUS frame generation. The single TUS report provides all necessary information to comply to CQI9 and AMS2750E.
Please access www.ppsystems.co.th/ptm-software-training for more information about PhoenixTM software.
TXR-S-TX l RF Telemetry system comprises Co-ordinator, Router, Antenna HT and Data Logger transmitter module
Two Way RF telemetry real time transmission (must be purchased with new system). System comprises: 1 x TXR-PTM-TX Transmitter module factory fitted to data logger, frequency 2.4 GHz. Transmission speed 250Kbits/sec.
Transmission range 160m in free space.
1 x TXR-1001-TX Coordinator to receive signal from the logger or router(s) in the ‘mesh’. Uses LwMesh networking Protocol. AC01-002 communications cable supplied
1 x TXR-1000-TX Router to receive / retransmit signal from the logger to the Coordinator, or to other Routers in the ‘mesh’. Wall mounting bracket supplied
1 x High temperature antenna to transmit signal from data logger (either AC30-001 or AC30-007 depending upon application)
Note : RF telemetry requires Thermal View Plus software version 3.0 onwards.
Brochure HTS-12 System : Download Here
HTS Product Overview : Download Here
Publication Measurement of a Cooling Process in an Oil Quench Bath : Download Here
Data Sheet HT-Data Logger : Download Here
Data Sheet Fibre Glass Thermocouple : Download Here
Data Sheet Mineral Insulate Thermocouple : Download Here
Data Sheet Thermal View Plus Software : Download Here
Data Sheet Thermal View Survey Software : Download Here
Online Training HTS-12 (TH) : Download Here
Online Training HTS-12-TX (TH) : Download Here
Blink Code PTM1200 Series (firmware ver. before 19.2) : Download Here
Blink Code PTM1200 Series (firmware ver. after 19.2) : Download Here
Integrated Quench Furnace Survey - Bypass (EN) : Click Here
Integrated Quench Furnace Survey (EN) : Click Here
Integrated Quench Furnace Survey (JP) : Click Here
TR-200129-1 TUS Software Introduction (TH) : Click Here
TR-200129-2 Reset Data Logger via RF Telemetry (TH) : Click Here
TR-200129-3 Thermocouple Inspection (TH) : Click Here
TR-200129-4 TUS CQI-9 Frame Setup (TH) : Click Here
TR-200129-5 TUS Surveying & Analysis (TH) : Click Here
PTM1200 Reset & Download via Mobile (TH) : Click Here
PTM1200-TX RF Telemetry (TH) : Click Here
Calibration Service Local (TH) : Click Here
Calibration Service Inter (TH) : Click Here