PhoenixTM 10Ch Classic Finishing System
SKU : FIS-04-113-10
Application : paint & powder coating
PTM1-210-K-LT l 10 Channel Data Logger, temperature measuring range 0°C to 500°C, type K, standard temperature operation.
Accuracy +/- 0.3°C, resolution 0.1°C.
Total memory 3.8M data points of non-volatile memory over 10 channels.
Sampling interval 0.2s to 60 minutes on all selected channels.
Maximum ambient operating temperature 80°C.
Original calibration certificate and correction factors stored in memory for access as required.
Up to 1000 hours battery life from 2 x ‘AA’ Alkaline Standard Batteries.
USB communication cable included.
Dimensions: 200mm(L) x 98mm(W) x 20mm(H).
TS04-113-5 l Series TS04 - 113mm High, Light Weight, Thermal Barrier - Finishing / Paint & Powder Coating
Silicone free construction, aluminium alloy casing with microporous insulation and 1 x TS00-527 phase change heat sink.
Lid fitted with a steel plate for easy attachment of magnetic thermocouples 2 Handles for carrying or hanging.
Catches lockable with spring clip.
Measurement potential = 10 channels. Accepts 6 or 10 channel PTM Data Loggers.
10 hours at 100°C,
5.0 hours at 150°C,
3.0 hours at 200°C,
2.0 hours at 250°C.
1.5 hours at 300°C.
Dimensions: Height 113mm x Width 185mm x Length 320mm.
Weight: 4.4 Kg
All Phoenix TM thermocouples are manufactured to the highest quality standards and conform to the ANSI MC96.1 special limits specification with accuracy +/-1.1°C or +/-0.4%. The insulation material and the plug terminations are color coded to conform to the IEC 60584 standard.
For low temperature applications (up to 250°C) such as paint and powder coat curing in the finishing industry, various types of thermocouples are available; these include magnetic fixing for steel substrates and clamp fixings for non ferrous surfaces. Air and surface thermocouples are available in both magnetic and clamp type probes.
The thermocouple construction is designed to withstand rough handling, the type K, PTFE insulated wires are triple wrapped with stainless steel braid, and have a final overall PTFE insulation.
Thermocouples for the finishing industry have a unique design of removable sensor (magnetic and clamp) so that when the insulated cable wears, it can be replaced without the need to buy a complete assembly. This results in high potential savings.
TC54-100-K l PTFE Exposed Junction Thermocouple Type K - 1.0m long
TC54-150-K l PTFE Exposed Junction Thermocouple Type K - 1.5m long
TC54-200-K l PTFE Exposed Junction Thermocouple Type K - 2.0m long
TC50-100-K l Magnetic Surface Thermocouple Type K - 1.0m long
TC50-150-K l Magnetic Surface Thermocouple Type K - 1.5m long
TC50-200-K l Magnetic Surface Thermocouple Type K - 2.0m long
TC51-100-K l Magnetic Air Thermocouple Type K - 1.0m long
TC51-150-K l Magnetic Air Thermocouple Type K - 1.5m long
TC51-200-K l Magnetic Air Thermocouple Type K - 2.0m long
TC52-100-K l Clamp Surface Thermocouple Type K - 1.0m long
TC52-150-K l Clamp Surface Thermocouple Type K - 1.5m long
TC52-200-K l Clamp Surface Thermocouple Type K - 2.0m long
TC53-100-K l Clamp Air Thermocouple Type K - 1.0m long
TC53-150-K l Clamp Air Thermocouple Type K - 1.5m long
TC53-200-K l Clamp Air Thermocouple Type K - 2.0m long
SW45 l Thermal view finishing software
PhoenixTM ‘Thermal View Finishing’ is a powerful, comprehensive yet easy to use software package designed specifically for the PhoenixTM Compact and Finishing ‘Thru-process’ Temperature Profiling systems. The software has been developed to allow not only control of the data logger but also permit the detailed review, analysis and reporting of the
thermal cure profile. Features supplied in the software program have been developed to allow the user to accurately determine that the paint or powder coating is achieving the correct cure to provide the required physical and cosmetic properties. The software takes raw temperature data and coverts it to useful information that allows understanding, control, optimization and validation of the cure process. The key fundamentals of the software design are:
- Simplicity: Screen layout is clear, concise, and intuitive making the software user friendly, uncluttered and easy to use without compromise to the analysis detail available.
- Clarity: Graphical analysis tools allow efficient accurate process Pass/Fail identification. Detailed report options allow quick clear communication of profile information to customers or quality auditors alike.
When data is downloaded from the logger, the results are automatically saved in a database which can be organised in a logical manner for easy access to historical process data. Process templates can be constructed for each profile run. With a simple click, all saved Oven settings (Zones & Set-points), Product information (Probe locations on product image) and
fixed Cure analysis settings (Time @ Temperature or Cure Chart) can be attached to the profile. The Thermal View Finishing software comes with a unique graphical cure analysis function allowing instantaneous identification of cure performance against Time @ Temperature thresholds. To complement the profile data the user can add additional notes either on the profile pointing out profile features of interest or in the notes section which may allow complementary QA test data to be added. Customized report options allow the user to select the optimal format to present profile findings which can be printed directly or saved as a PDF which can be shared efficiently (via e-mail) to any interested parties.
The analysis functions allow you to examine and assess all your critical process parameters in a fast uncomplicated way. For example, it is possible for the user to click and drag 'inspection areas' to any point within the profile so calculations like 'time at temperature' and maximum and minimum temperatures' can be made within specific areas rather than across the whole process.
Please access www.ppsystems.co.th/ptm-software-training for more information about PhoenixTM software.
Brochure FIC-04 System : Download Here
Brochure FIS-04 System : Download Here
Data Sheet LT-Data Logger : Download Here
Data Sheet LT-Thermocouple : Download Here
Data Sheet Thermal View Software : Download Here
Data Sheet Thermal View Finishing Software : Download Here
Data Sheet PhoenixTM Factor - Accurate Cure Analysis : Download Here
Application Story Wicket System : Download Here
Application Story Paint Curing : Download Here
Application Story Vanish Curing : Download Here
Quick Reference Guide FIC-04 (TH) : Download Here
Online Training FIC-04 (TH) : Download Here
Online Training FIS-04 (TH) : Download Here
Online Training FIS-04-TX (TH) : Download Here
Blink Code PTM1-006-K Compact : Download Here
Blink Code PTM1200 Series (firmware ver. before 19.2) : Download Here
Blink Code PTM1200 Series (firmware ver. after 19.2) : Download Here
Webminar WBS-PTM-200115 (TH) : Click Here
Finishing Product Overview (TH) : Click Here
Compact Finishing System (TH) : Click Here
Compact Finishing System (EN) : Click Here
Video Instruction FIC-04 Hardware (TH) : Click Here
Video Instruction FIC-04 Software (TH) : Click Here
Video Instruction FIS-04 Reset & Download via PC (TH) : Click Here
Video Instruction FIS-04 Reset & Download via Mobile (TH) : Click Here
Video Instruction FIS-04-TX RF Telemetry (TH) : Click Here
Calibration Service Local (TH) : Click Here
Calibration Service Inter (TH) : Click Here