PhoenixTM 6Ch Compact Finishing System
SKU : FIC-04-113-6
Application : paint & powder coating
PTM1-006 Compact l 6 Channel Data Logger, temperature measuring range 0°C to 500°C, type K, Standard temperature operation.
Accuracy +/- 0.3°C, resolution 0.1°C.
Total memory 440,000 data points of non-volatile memory over 6 channels.
Sampling interval 0.5s to 60 minutes.
Maximum ambient operating temperature 80°C.
Uses 2 x ‘AA’ Alkaline Standard Batteries.
USB communication cable included.
Dimensions: 200mm(L) x 98mm(W) x 20mm(H).
TS04-113-3 l Series TS04 - 113mm High Thermal Barrier - Finishing / Paint & Powder Coating
Silicone free construction, aluminium alloy casing with microporous insulation and 1 x TS00-537 phase change heat sink.
Lid fitted with a steel plate for easy attachment of magnetic thermocouples 2 Handles for carrying or hanging.
Catches lockable with spring clip.
Measurement potential = 6 channels.
Accepts PTM1-006 Compact Data Logger
7.5 hours at 100°C,
3.5 hours at 150°C,
2.2 hours at 200°C,
1.6 hours at 250°C,
1.2 hours at 300°C.
Dimensions: Height 113mm x Width 161mm x Length 320mm.
Weight: 3.7 Kg
All Phoenix TM thermocouples are manufactured to the highest quality standards and conform to the ANSI MC96.1 special limits specification with accuracy +/-1.1°C or +/-0.4%. The insulation material and the plug terminations are color coded to conform to the IEC 60584 standard.
For low temperature applications (up to 250°C) such as paint and powder coat curing in the finishing industry, various types of thermocouples are available; these include magnetic fixing for steel substrates and clamp fixings for non ferrous surfaces. Air and surface thermocouples are available in both magnetic and clamp type probes.
The thermocouple construction is designed to withstand rough handling, the type K, PTFE insulated wires are triple wrapped with stainless steel braid, and have a final overall PTFE insulation.
Thermocouples for the finishing industry have a unique design of removable sensor (magnetic and clamp) so that when the insulated cable wears, it can be replaced without the need to buy a complete assembly. This results in high potential savings.
TC54-100-K l PTFE Exposed Junction Thermocouple Type K - 1.0m long
TC54-150-K l PTFE Exposed Junction Thermocouple Type K - 1.5m long
TC54-200-K l PTFE Exposed Junction Thermocouple Type K - 2.0m long
TC50-100-K l Magnetic Surface Thermocouple Type K - 1.0m long
TC50-150-K l Magnetic Surface Thermocouple Type K - 1.5m long
TC50-200-K l Magnetic Surface Thermocouple Type K - 2.0m long
TC51-100-K l Magnetic Air Thermocouple Type K - 1.0m long
TC51-150-K l Magnetic Air Thermocouple Type K - 1.5m long
TC51-200-K l Magnetic Air Thermocouple Type K - 2.0m long
TC52-100-K l Clamp Surface Thermocouple Type K - 1.0m long
TC52-150-K l Clamp Surface Thermocouple Type K - 1.5m long
TC52-200-K l Clamp Surface Thermocouple Type K - 2.0m long
TC53-100-K l Clamp Air Thermocouple Type K - 1.0m long
TC53-150-K l Clamp Air Thermocouple Type K - 1.5m long
TC53-200-K l Clamp Air Thermocouple Type K - 2.0m long
SW05 l Thermal view software
PhoenixTM 'Thermal View' is a powerful software package allowing you to quickly and easily analyze data from your process. Screen layout is clear and using the enhanced control bar makes this a very easy, package to operate, with all the analysis functions you will need.
Above all two key elements have been fundamental in the design of this software:
- Simplicity. Too many software packages have functions built in that benefit only a few users and complicate the package for the majority. We have avoided this without compromising the available analysis in Thermal View
- Clarity. The software screen has been laid out so users can see what is really important to them - the profile of their oven, furnace, or kiln. The user interface is clearly laid out at the side of the screen to give maximum space to the profile and calculation area.
When data is downloaded from the Data Logger, the results are saved in a database for easy access which can be organized in a logical manner using the multi column sorting facility. Process templates can then be constructed so the data can be overlaid against a backdrop which represents all physical points within your oven / furnace.
The analysis functions allow you to examine and assess all your critical process parameters in a fast uncomplicated way. For example, it is possible for the user to click and drag 'inspection areas' to any point within the profile so calculations like 'time at temperature' and maximum and minimum temperatures' can be made within specific areas rather than across the whole process.
Please access www.ppsystems.co.th/ptm-software-training for more information about PhoenixTM software.
Brochure FIC-04 System : Download Here
Brochure FIS-04 System : Download Here
Data Sheet LT-Data Logger : Download Here
Data Sheet LT-Thermocouple : Download Here
Data Sheet Thermal View Software : Download Here
Data Sheet Thermal View Finishing Software : Download Here
Data Sheet PhoenixTM Factor - Accurate Cure Analysis : Download Here
Application Story Wicket System : Download Here
Application Story Paint Curing : Download Here
Application Story Vanish Curing : Download Here
Quick Reference Guide FIC-04 (TH) : Download Here
Online Training FIC-04 (TH) : Download Here
Online Training FIS-04 (TH) : Download Here
Online Training FIS-04-TX (TH) : Download Here
Blink Code PTM1-006-K Compact : Download Here
Blink Code PTM1200 Series (firmware ver. before 19.2) : Download Here
Blink Code PTM1200 Series (firmware ver. after 19.2) : Download Here
Webminar WBS-PTM-200115 (TH) : Click Here
Finishing Product Overview (TH) : Click Here
Compact Finishing System (TH) : Click Here
Compact Finishing System (EN) : Click Here
Video Instruction FIC-04 Hardware (TH) : Click Here
Video Instruction FIC-04 Software (TH) : Click Here
Video Instruction FIS-04 Reset & Download via PC (TH) : Click Here
Video Instruction FIS-04 Reset & Download via Mobile (TH) : Click Here
Video Instruction FIS-04-TX RF Telemetry (TH) : Click Here
Calibration Service Local (TH) : Click Here
Calibration Service Inter (TH) : Click Here